0/1-10V Dimming Principle

The dimmable driver is designed with a control chip, when a 0-10V or 1-10V dimmer is connected, the output current of the led driver can be changed through the 0/1-10V voltage change.

The Features of 0-10V and 1-10V

1. 0/1-10V dimming driver is a low voltage analog signal dimming mode, which is controlled by the dimmer changing the voltage of 0-10V to control the led driver’s output current. When the 0/1-10V dimmer is turned up to the maximum, the lamp will output full brightness. When the 0-10V dimmer modulates to 0, the lamp turns off the output.
2. The dimming difference between 0-10V and 1-10V: dimmer and the signal turn-off voltage. When the 0-10V dimmer is set to 0.3V-0.7V, the light is turned off, and when the 1-10V dimmer is set to 1-1.2V, the lamp is turned off.
3. The dimming performance, dimmer distance are related to the number of led drivers and environmental interference. Too many led drivers and too long signal lines will cause problems such as not being turned low voltage, not turning off, etc. The maximum measured distance of the signal line is 200 meters and 1.5 square shielded lines.
4. 0-10V dimming driver is compatible with 0-10V and 1-10V dimming systems.
5. The same signal circuit can control both light and dark at the same time, but can not be controlled by single lamp.
6. The dimmer (dimming system) is divided into 0-10V and 1-10V dimming signals.

The 0/1-10V Dimming Driver of KSPOWER

KSPOWER provides two series of dimmable driver to support 0/1-10V dimming: HO - 4 In 1 dimmable driver and LO - 4 In 1 dimmable driver. All 4 In 1 dimmable driver is rated IP65 for indoor and outdoor lighting, dimming down to 1% with 0-10V / 1-10V / 10V PWM / Resistor dimmers with UL/cUL CE ENEC FCC Class P Class 2 SELV safety certifications. The HO series dimming driver is LISTED enclosure with integrated junction box and without junction box. The LO series dimming driver is designed to ultra slim case(height to 1’’(24.5mm)), includes a separate input and output wiring compartments with knock-outs for clean and easy installation. The distributions and clients can choose according to different installations and international standard requirements. KSPOWER always concentrate on doing one thing well and provide customers with a competitive and reliable power supplies which is why we take the time to R&D and expensive process to test our drivers.